X1009-v1.1 Hardware & Installation

x1009-v1.1 Hardware Required Hardware
  • X1009 PCIe to 5-port SATA shield
  • Raspberry Pi 5 Model B
  • Micro-SD card (≥16GB) x1
  • 7-pin SATA data cable x5 (not included in the X1009 kit)
  • Power adapter 12Vdc output, plug size 5.5x2.1mm

Required output current:

  • ≥3A if your SATA drives are powered from a separate PSU
  • ≥5A for two 3.5" HDDs, ≥7A for three 3.5" HDDs, ≥9A for four 3.5" HDDs, ≥11A for five 3.5" HDDs
  • ≥4A for two 2.5" HDDs, ≥5A for three 2.5" HDDs, ≥6A for four 2.5" HDDs, ≥7A for five 2.5" HDDs

Note: Do not power the X1009 via DC power jack and the Raspberry Pi 5 via USB-C at the same time.

Hardware Installation

For further assistance or inquiries, please reach out to our support team at info@edgecase.shop or sales@edgecase.shop. We are here to help you with any questions you might have.